How To Videos
How To Video
How to install the Power Nozzle:
First you’ll want to pull the belt lifter handle on the Power Nozzle, or the head of the vacuum, toward you and turn it counterclockwise until the red arrows line up. The hook should catch and stretch the belt inside the nozzle. Then raise the headlight hood. Reset the two hooks on the back of the nozzle on the attaching bar, which is located on the front of the unit. Press the nozzle against the unit and secure with the Accessory Lock. Then, pull the belt lifter handle toward you again and turn it clockwise until the green arrows line up. (See page 22 of the owner manual).
How To Video
How to change the bag
First make sure your outer bag is unzipped and the top adaptor is pulled out. Take a new disposable bag out of the packaging. Then, rest the cardboard faceplate of the disposable filter bag against the bottom of the adaptor. Pivot the faceplate against the flat surface of the adaptor and bend and press the tab at the top of the faceplate until it’s secure. The bag support strap should be connected through the small hole on the adaptor, which is over the stud. Once connected, place the whole bag inside the outer bag and close the zipper.